This dry nitrous system is full adjustable from 25-50HP and up to 175HP
with special tuning. The best part is that it works with your factory EFI
This Dry system utilizes your factory injectors to add the extra fuel needed
to make more power. By spraying Cold Nitrous oxide across the MAF (Mass Air Flow
Sensor) it tricks the factory computer into thinking there is a lot more air
going into the engine. The Vehicles factory ECM adds additional fuel via the OEM
fuel injectors. Simple, clean and very powerful!
This System will work on 4&6 Cylinder Engines and comes complete
with all the parts and instructions needed for installation. The system is
adjustable from 25 to 50HP.
The following parts are included: >10lb bottle with
high flow valve
>4AN bottle nut & Teflon washer
>Stainless quick connect Bottle brackets and hardware
foot braided stainless feed line, blue fittings
>High Flow Nitrous
>Solenoid mounting bracket
>2 foot Braided
stainless Nitrous line with Blue fitting.
>Jets for 25, 35 and 50HP
(max 175hp with diffrent jet)
>Dry Flow Nozzle
Mounting adaptor so the Nozzle does not blow out during injection, makes
mounting the nozzle in plastic or rubber a snap!
switch, relay, wire and wire harness, fuse, crimp terminals etc..
>Micro throttle activation switch and mounting bracket
>Our 18 page Nitrous installation and tuning book is included! Full
pictures and detailed installation instructions for all Dry fuel injection
This Dry EFI Kit is the most complete kit available.
Quality stainless steel components are standard on all DynoTune Nitrous kits.
This DynoTune Nitrous kit is tuned for Safe reliable Horsepower increase
on vehicles with hot wire MAF sensors(most GM and Ford vehicles plus some
imports). More and more folks are switching to DynoTune products due to the
price, Performance, innovation and support you will get with no other
Isnít it time you made the switch?