Advanced Search       

Shopping Cart
Qty 0
Total $0.00
 

 

HomeAbout Our GaugesNitrous Jet CalculatorCustomer PicturesVideo'sInstructionsAccountCartCheckoutContact Us

 

Products

 

 

Air/Co2 Shifters

 

 

 

Brackets

 

 

  Bottles & Parts

Braided Lines

Direct Port Parts

Electrical Parts

Gauges Round

Gauges Square

Gauge Adaptors

Jets

N2O Controllers

Nitrous Fittings

Nitrous kits

Openers

Purge kits

Sensors & Bungs

Solenoids

Warmer kits

 

Other Parts

 

 

 

   Wide Band Gauges

 


Under Development

Under Development

 

 

New Products

1) DynoTune Digital air shifter kill box.

 

 

2)Air/Fuel ratio lean shutoff switch

 

 

3) Low Cost Progressive controller now in stock!

 

 

 

 

 


Your IP Address
For security, your IP address is recorded as:
44.211.34.178


Black Widow Spray Bar kit, Twist on twin bottles (614.2)

Black Widow Spray Bar kit, Twist on twin bottles


 

Sting the competition with the DynoTune Black Widow Nitrous Kit. This kit is the most complete kit available. Made for high horsepower 4 cyl bikes, this kit will flow up to 150hp. Finally a complete universal kit made for any fuel injected 4 cyl motorcycle.

Custom fit your spray bar to your preference! Simply install the black widow spray bar, bend your tubing, cut to length and your done.

This kit is the ultimate in tuneablity. Designed for use with or without progressive controllers, this kit jets at the spray bar and at the solenoid for tons of fine tuning ability. Other spray bars do not work with progressive controllers due to poor design. if you mount jets at the spray bar, all the braided line and inside the spray bar acts like a reservoir holding the pressure. It will not pulse the pressure as it would take a second or two to bleed past the jets. By jetting at the solenoid the pressure will build much slower in the lines giving way more control of the nitrous coming out of the hole. Jet changes are now a snap! No more lifting the tank, simply swap the one jet on the solenoid.

Comes complete with a tubing bender, tubing cutter, extra tube, jets, black widow spray bar, braided lines, the list goes on and on.



 

 Comes with twist on bottles and billet brackets similar as above. Note, specific models that use an adaptor bracket are exta $(This is the long bracket that makes mounting the arched billet brackets, a bolt on affair).

NOTE: This kit requires the use of a programmable fuel device like a power commander or bazzaz. You must have the nitrous system professionally tuned before you use the nitrous!

 

 Kit comes with:

>Black widow spray bar with spacers and mounting bolt

>150hp nitrous solenoid

>solenoid bracket

> 3 jet settings

>5 stainless bendable tubes 12" long each

>4 tube nuts and sleeves

>1 foot -3an to -3an braided line to spray bar

>2 foot -3an to -3an braided line from solenoid

>qty 2, 2 foot -3an to -4an braided feed line from bottle

>T fitting to Solenoid

>electrical kit with wire, arming switch, etc

>qty 2, 12oz or 20oz nitrous bottles

>qty 2 quick connect billet arched brackets

>tubing bender and tubing cutter

>-3an bulkhead fitting

 

Custom length braided lines are available, just call in your order or send us a note in the order.

NOTE: If using 20oz bottles you need to check for clearnence for bodywork etc, they are much larger than the 12oz bottles!



Miscellaneous :
Product Inquiry
    
Ready To Order?

Our Price: $479.00

Item in stock!

Foot Peg Bracket Adaptor Twin Bottles (*) :

Jets wanted, enter like 10/20/35HP you get qty 3 (*) :

Twin Bottle Size And Finish (*) :

Pick Your Bracket Color. (*) :


 



(*) Mandatory Option


Related Products :


| Privacy |
Copyright 2024  DynoTune  
Page displayed in: 0.0742 seconds.