DynoTune Nitrous Systems Perform!!!

This System will work on 4 or 6 cylinder engines. The system is adjustable from 35 to 75 HP. It can go up to 150hp with diffrent jets.

The following parts are included:

>10lb bottle with high flow valve
>4AN bottle nut & Teflon washer
>Stainless quick connect Bottle brackets and hardware
>16 foot braided stainless feed line, blue fittings
>High Flow Nitrous and Fuel solenoids
>Solenoid mounting bracket
>2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings
>Braided stainless line for Fuel rail test port installation, red fitting
>Jets for 35, 50 and 75HP (max 175hp with diffrent jets)
>High flow Wet Nozzle

>Wet Nozzle Mounting adaptor so the Nozzle does not blow out during injection causing a fire, makes mounting the nozzle in plastic or rubber a snap!

>Nozzle tap

>5/16" fuel injection hose with clamps and brass "T", all fittings and clamps for a complete installation

>Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc..

>Micro throttle activation switch and mounting bracket

>Our 22 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for all the fuel injection applications

This Universal EFI wet Kit is the most complete kit available all the way down to the Tap for the nozzle. Quality stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass.

This DynoTune Nitrous kit is tuned for Safe reliable Horsepower increase. More and more folks are switching to DynoTune products due to the price, Performance, innovation and support you will get with no other Manufacturer.
Isn�t it time you made the switch?