This kit works on Honda
Note: On 2008 up CBR it will require some cutting of the
undertail to clear the brackets and some tweeking of the bracket
How do the bottles mount and get filled? Watch the Video
here>> "Mounting and Refilling"
This DynoTune dry Motorcycle nitrous oxide
system will add up to an additional 80HP to your Ride (Power commander
needed for 40HP or larger jetting). Comes with eveything you need for a complete
installation. This Dry kit uses your bikes EFI sensors to add the additional
fuel needed to make the Power! By passing the cool nitrous charge past the Air
Temperature sensor in the intake track, we can fool the bikes EFI system into
adding the little extra fuel you need to make some sweet power! Note: Consult
your factory manual to make sure you have a "Air Temperature" sensor in your
intake (Most EFI Bikes have a Temp sensor). Comes with three jet settings of
15HP, 30HP, and 40HP.
CBR1000RR kits comes with custom bracket adaptors as
Note: Mounting a bottle on passenger side of
bike requires you to move the rear brake reservoir just a
Bottles twist on to mount so
changing bottles is a ten second process, great for the race track! Custom
painted bottles will no longer be scratched!
The Motorcycle nitrous oxide system Comes complete with
instructions on how to use your Horn or starter for nitrous activation making it
a clean installation.
The Twin inlet system allows the user to configure the inlet
any way they want. Single or dual snorkel intakes, its all in the kit! High
Heat/Pressure teflon tubing inculded.
motorcycle nitrous oxide kit includes the following:
-- 2 12oz black powder coated Nitrous Bottles (Chrome/Brushed
-- 2 Billet bottle mounting brackets
two foot stainless bradied nitrous lines
-- 2 Nozzles with mounts
-- High flow Nitrous Solenoid
-- Three nitrous jets
Electrical kit with switch, terminals etc.
-- High Pressure teflon
tubing and compression fittings.
-- Nitrous bottle fill adaptor. Bottles
simply twist off in seconds for the ulitmate in quick filling.
-- Custom CBR1000RR Bracket adaptors
following options are available:
-- 20oz bottles:Measure to
make sure they will fit your application as the bottles are large! 11.5" long x
-- Diffrent color brackets now
-- Bottle color, Brushed, Gloss black, Show polished
ATTENTION!!! NOTE: Old style bracket shown above. All the new
brackets shown below
will have the larger round knobs. The knobs are much easier to turn, will
not come off, and the brackets are thicker and stronger than ever! It comes with
a Gauge port built into the side of the bracket (1/8" NPT threads) plus the
standard outlet fitting on the opposite side. (Gauge sold separate) All new kits
will come with this style bracket(s).
Note: Mounting a bottle
on passenger side of bike requires you to move the rear brake
reservoir just a bit.