DynoTune Nitrous Systems Perform!!!

The following parts are included:

 
>10lb bottle with high flow valve
>4AN bottle nut & Teflon washer
>Stainless quick connect Bottle brackets and hardware
>16 foot braided stainless feed line, blue fittings
>High Flow Nitrous and Fuel solenoids
>Solenoid mounting bracket
>2 foot Braided stainless Nitrous and Fuel feed lines, red and blue fittings
>Braided stainless line for Fuel rail test port installation, Billet fuel rail adapter with red fitting
>Jets for 35, 50 and 75HP put a comment during checkout if you want different HP jets!
>2 High flow Wet Nozzles
>Wet Nozzle Mounting adapters so the Nozzles does not blow out during injection, makes mounting the nozzle in plastic or rubber a snap!
>Lighted arming switch, relay, wire and wire harness, fuse, crimp terminals etc..
>Micro throttle activation switch and mounting bracket, many folks use an RPM window switch with TPS activation to make the installation even simpler
>Our 20 page Nitrous installation and tuning book is included! Full pictures and detailed installation instructions for this application.

Stainless steel components are standard on all DynoTune Nitrous kits, not plastic or brass.

This DynoTune Nitrous kit is tuned for a safe reliable Horsepower increase. More and more folks are switching to DynoTune products due to the price, Performance, innovation and support you will get with no other Manufacturer. Isn�t it time you made the switch?

NOTE: YOU WILL NEED A WIDE OPEN THROTTLE SWITCH DEVICE TO ACTIVATE THE SYSTEM. AN RPM WINDOW SWITCH WITH TPS ACTIVATION IS BEST. A MECHANICAL WOT SWITCH IS A BIT DIFFICULT TO INSTALL ON THIS NEW FLY BY WIRE GAS PEDAL ASSEMBLY BUT MANY FOLKS DO IT.