This air shift kit is the best one the market. It will make the quickest shifts around and decrease your ET a whole bunch! A simple air tank system, just fill it with your bike tire pump or compressor before each run, pump to 120PSI. Simple, cost effective lightning quick shifts. Compare our kit to others and you will see why DynoTune always wins.
> Massive ports in air solenoid=lightning quick shifts, 12V
>High flow 2 port bottle outlet, ulitimate in installation flexibility! One port out the top, two ports out the side. (1/8" NPT ports)
>Stainless 160 PSI pressure gauge...mount the gauge to your bottle or remote mount to the front of the bike, all the fittings to mount both ways are included!
>Nickel Chrome fittings, 90 degree swivel fittings etc, not plastic cheap ones.
> Air fill adaptor, mount to bottle or remote mount the filler to someplace else on the bike, the fittings are included!
>Dot air bottle, pick your color and size!
>Stainless bottle bracket with T bolt.
>10 feet of black air tubing
>2" travel on air cylinder, universal mount with clevis and nuts, quality long life, low friction seals, micro polished bore etc!
Note: Only to be used for off road use only, only use compressed air in the system, not CO2 or nitrous etc.
These kits are universal and require other parts to make it work. You will need to fabricate or buy a small right angle bracket so you can mount the shifter air cylinder to the side of your engine or frame. You will also need an ignition or fuel kill box. These devices unload the transmission during shifts so it will go into the next gear, just like clutchless shifting manually.... we sell them, check them out in the air shifter section... The power commander v has these kill features built into it.. the power commander 3 will work as well if you buy the power commander HUB and plug that into it.